WT 101

DESCRIPTION

WT 101 is a multipurpose additive for use in either "sweet" or "sour" water injection systems. WT 101 will give excellent results in high chloride brines. Incorporated in this product are corrosion inhibitors, scale inhibitors and tension reducing surfactants, which will help keep metal surfaces clean, reduce injection pressure, work as an effective dispersant and prevent scale development.

TYPICAL PROPERTIES

Continuous treatment by a chemical pump attached to the suction site of the injection pump is the preferred method of treatment. Batch treatment into the water tank can also be used as a method to get these chemicals into the injection system. WT 101 should be used at 25-50 ppm depending on the severity of the problem and the water characteristics.

Caution: Combustible Corrosive Liquid. Safe when used according to directions. This product is a stable material and may be stored for several years. Do not take internally. Keep away from eyes. Normal precautions in handling organic chemicals should be observed. For further information and instructions see MSDS.